+5491123083729 / 0341-424-4599
Deposito Av. Vélez Sarsfield 1860, C1285 AAU, Buenos Aires - Showroom Urquiza 1301 Rosario (2000), Santa Fe

TURBOSOUND NUQ122-AN KLARK TEKNIK DSP ULTRANET

2500 Watt 2 Way 12" Full Range Powered Loudspeaker

$ 2.236.101
$2.236.101
3 cuotas de $819.903 ($2.459.711)
6 cuotas de $447.220 ($2.683.321)

Compra protegida.

Compartir

Descripción

2500 Watt 2 Way 12" Full Range Powered Loudspeaker with Klark Teknik DSP Technology and ULTRANET Networking
Product Features
Show less
2 way full range powered loudspeaker for portable PA and installation applications

2,500 Watt power featuring Klark Teknik Class-D technology

Klark Teknik Digital Signal Processing for total system control

ULTRANET digital audio networking connects to mixers and other sources

12" low frequency driver with low mass voice coil for improved transient response

Aluminium dome 1" neodymium motor compression driver

Low distortion waveguide provides 70° H x 70° V dispersion

Fully featured user interface with LCD display for ease of navigation

PC remote control software downloadable at turbosound.com

15 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish

Rugged powder coated perforated steel mesh grille

Integral 35 mm pole mount and handles

Multiple internal rigging points allow bracket mount and suspension in any orientation

Mains input on Neutrik powerCON connector

NuQ122-AN
NuQ122-AN
The 2 way full range NuQ122-AN is a 2,500 Watt 12" powered loudspeaker system that is ideally suited for a wide range of portable and fixed installation speech and music sound reinforcement applications. Designed to work individually without a controller, the NuQ122-AN provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.

The NuQ122 loudspeaker features a 12" low frequency driver with a low mass voice coil for improved transient response and an aluminium dome 1" neodymium high frequency compression driver, which is mounted on a 70° horizontal by 70° vertical dispersion low distortion waveguide.

Output power for the NuQ122-AN is provided by means of an efficient and lightweight Klark Teknik 2,500-Watt Class-D power amplifier. A sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP) provides dynamic EQ for impressive full range response at low volume levels and transparent limiting for clarity at high output levels – and for long-term reliability.

On the rear panel of the amplifier module, the user interface's LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, subwoofer integration and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the NuQ122-AN via PC computer, as well as DSP firmware updates.

ULTRANET connectivity is provided by two locking etherCON * connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.

Finished in a highly durable semi matt black paint, the trapezoidal cabinet is constructed from 15 mm (5/8") birch plywood – and includes a rugged powder coated perforated steel mesh grille. Multiple threaded rigging points are provided for suspension in any orientation. The NuQ122-FY flying yoke kit provides added flexibility in permanent install applications (available separately). The NuQ122-AN also features a 35 mm socket for standard pole mounting – plus integrated handles for convenient transport. Mains power input is provided via a Neutrik powerCON * connector.

Architecture & Engineering Specifications
The loudspeaker shall be of the full range, two-way, powered type, consisting of one 12" (316 mm) LF driver and one 1" (25 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 55 Hz to 18 kHz and within -10 dB from 50 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 70° H x 70° V. Maximum amplifier output power shall be 2,500 Watts peak, independent of limiters and driver protection circuits. Maximum SPL (peak), measured at 1 metre with music program, shall be 131 dB. Dimensions: 656 mm high x 374 mm wide x 340 mm deep (25.8" x 14.7" x 13.4"). Net weight: 20.2 kg (44.5 lbs). The loudspeaker system shall be the Turbosound NuQ122-AN. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.

Specification
Show less
System
Frequency Response
55 Hz – 18 kHz ±3 Db
50 Hz – 20 kHz -10 dB

Nominal Dispersion
70° H x 70° V @ -6 dB points

Maximum SPL
131 dB peak

Crossover Type
Active

Transducers
1 x 12" ( 315.5) LF driver
1 x 1" (25.4 mm) HF compression driver

Limiter
Independent HF, LF, peak and rms

Amplifier
Maximum Output Power*
2,500 W

Connectors
Input/link
1 x Combo Jack/XLR 1 x XLR

Ultranet input/link
2 x RJ45

Mains Supply
Neutrik powerCON 20A†

Controls
DSP
Rotary push-encoder and level control
Buttons for Process, Setup, Exit, Enter

User DSP Functions
Factory EQ Presets
Positioning, Sound mode, FBQ

Display
LCD 128 x 32, blue, backlit

Delay
0 - 300 ms

Equalisation
High and low shelving EQ 2 x parametric EQ

Limiter
Zero attack input limiter

Presets
20 total presets, 19 user-definable

Crossover
High Pass L-R 24 dB/oct

Protection
Lock-out function for all settings

Ultranet Digital Network
Digital processing
System
Cabling
Power Supply
Power consumption
90 W @ 1/8 max power

Voltage (fuses)
Enclosure
Dimensions HWD
656 x 374 x 340 mm (25.8 x 14.7 x 13.4")

Net weight
20.2 kg (44.5 lbs)

Construction
15 mm (5/8") birch plywood

Finish
Semi matt black paint

Grille
Powder coated perforated steel

Flying hardware
M10 x 8 points

Accessories
NuQ122-FY flying yoke for NuQ122

Garantía

Todos los productos de nuestro sitio cuentan con la garantía de su fabricante. Consulte con nuestro staff cómo está protegida su compra.

Medios de pago

Puede pagar online de forma segura y en cuotas a través de MercadoPago con tarjetas de créditos de todos los bancos.
También puede reservar su pedido y abonarlo por depósito o transferencia bancaria o bien, en nuestro local al retirarlo.
Agregue el producto al carrito y continue con el proceso de pago online.

Medios de Envío

Hacemos envíos a todo el país. Consulte nuestros costos y formas de envío desde aquí.
También puede retirar en nuestro local, previa coordinación por teléfono o email.